Need help?Do you have a question about the Brunton Sherpa and is the answer not in the manual?
General| Brand | Brunton |
|---|---|
| Model | Sherpa |
| Category | Measuring Instruments |
| Language | English |
Explains the initial setup and basic configuration of the SHERPA instrument.
Discusses weather forecasting based on air pressure changes and the importance of altitude.
Describes the information displayed in the Barometer main menu, including air pressure trends and time.
Details how to reset the air pressure trend display to zero.
Provides instructions on how to adjust the barometer reference altitude.
Explains how to switch between absolute air pressure (QFE) and sea-level pressure (QNH).
Guides users on how to set the time on the altimeter display.
Describes the information shown in the Altimeter main menu, including current altitude and temperature.
Instructions for adjusting the altitude measurement and setting the QNH value.
Explains how to calibrate the pressure sensor for accurate altitude readings.
Covers wind measurement techniques and protecting the wind vane.
Details the information displayed in the Windspeed main menu, including current and peak wind speeds.
Instructions on how to reset the peak speed and mean wind speed values.
Guides users on setting the duration for calculating average wind speeds.
Explains how to adjust the calibration factor for the wind-vane sensor.
Describes how to choose between displaying the mean wind speed or the peak mean wind speed.
Presents the information in the Temperature main menu, including actual temperature and windchill.
Instructions for resetting the windchill display to its default state.
Details how to correct false temperature readings by adjusting the sensor calibration.
Covers adjusting the temperature correction value in option mode.
To Next Page
