Need help?Do you have a question about the Bryant 517E and is the answer not in the manual?
Describes the unit cabinet's construction, insulation, and finish for noise and thermal isolation.
Highlights application versatility, compact size, flexible mounting, and front access panels for serviceability.
Details the selection of PSC motors for energy efficiency and ease of speed changes with Molex connectors.
Focuses on optimal heat transfer, flare refrigerant connections, and leak-proof performance.
Explains the refrigerant metering device for efficiency, dependability, and easy external access.
Covers factory-installed and field-installed heaters, power options, and simple installation procedures.
Provides detailed physical measurements in inches for the 517E unit series.
Lists approximate shipping weights in pounds for various 517E unit models.
Specifies necessary minimum clearances in inches from the unit for safe operation.
Presents technical data for fan-coil and fan units without integrated electric heating.
Details electrical and performance specifications for 10, 15, and 20 KW electric heater units.
Presents specifications for 10 and 15 KW electric heater units for the N0480 series.
Provides specifications for 20 KW electric heater units (N048020) and 10 KW (N060010).
Details specifications for 15 and 20 KW electric heater units in the N0600 series.
Table showing airflow rates based on motor speed, coil type, and static pressure.
Lists part numbers, sizes, voltage, KW, capacity, and circuit protection for heat packages.
Recommends specific thermostat and subbase part numbers for various heating and cooling applications.
To Next Page
General
