EasyManuals Logo

Bryant 912SE Quick Start Guide

Bryant 912SE
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Product Data
A11264
Representative drawing only. Some product models may vary.
The 912SE Multipoise Legacy
92 Condensing Gas Furnace features a
single-stage gas valve and ECM blower motor. The fixed-speeds,
constant torque (MCT) ECM blower motor is at the heart of the
electrical efficiency provided by this furnace. With an Annual Fuel
Utilization Efficiency (AFUE) of 92.1% AFUE, the Legacy
single-stage gas furnace provides added savings over standard,
non-condensing gas furnaces. Improved serviceability with the 3 digit
status display and NFC enabled board allowing setup via the service tech
app. This Legacy Gas Furnace features 4-way multipoise installation
flexibility, and is available in nine model sizes. The 912SE can be vented
for direct vent/two-pipe, ventilated combustion air, or single-pipe
applications. A Bryant Legacy thermostat and Legacy Air Conditioner
or Heat Pump, can be used to form a complete Legacy Series System.
All sizes are design certified in Canada. All sizes are design certified for
use in Manufactured Housing (Mobile Home) applications when used
with factory-approved MH accessory kit.
PERFORMANCE
Multi 18-speed, constant torque (MCT) ECM blower motor for
electrically efficient operation all year long in heating, cooling and
continuous fan operation.
Single-speed inducer motor, and single-stage gas valve.
Silicon Nitride PerfectLight
Robust Hot Surface Igniter.
Adjustable blower speed for heating and cooling.
Enhanced diagnostics with easy to read 3 digit display for faults and
status
Aluminized-steel primary heat exchanger.
Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
4-way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow for 12 different venting options,
including optional venting through-the-cabinet downflow venting
capability.
On-board NFC antenna makes setup a tap away when using the
Bryant service technician app
Factory-configured ready for upflow applications.
Ideal height 35” (889 mm) cabinet: short enough for taller coils, but
still allows enough room for service.
Direct-vent/sealed combustion, single-pipe venting or ventilated
combustion air.
APPLICATIONS
Approved for Twinning applications with accessory kit (42060M17,
048080M17, 060080M21, 60100M21, 60120M24 models, only).
Approved for Manufactured Housing/Mobile Home applications with
MH accessory kit.
Convertible to propane with gas conversion accessory kit.
CERTIFICATIONS
All sizes meet ENERGY STAR
®
South regional standards.
Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air
leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with
ASHRAE standard 193.
All sizes can be installed in California air quality management
districts with a 40 ng/J NOx emissions limit.
A200350
912SE
Up to 92.1% AFUE, Single-Stage, Multi 18-Speed
ECM, Condensing Gas Furnace
WARNING
!
CARBON MONOXIDE POISONING AND FIRE
HAZARD
Failure to follow this warning could result in personal injury, death,
and/or property damage.
This furnace is not designed for use in recreation vehicles or outdoors.
This furnace is designed for use in manufactured (Mobile) homes when
an optional Mobile Home accessory kit is installed.
Failure to follow this warning could result in personal injury, death,
and/or property damage.

Other manuals for Bryant 912SE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bryant 912SE and is the answer not in the manual?

Bryant 912SE Specifications

General IconGeneral
BrandBryant
Model912SE
CategoryFurnace
LanguageEnglish

Related product manuals