1
915SA 95 AFUE
LEGACY LINE SINGLE--STAGE
4--WAY MULTIPOISE
CONDENSING GAS FURNACE
Product Data
A11264
The 915S Multipoise Condensing Gas Furnace is part of the
Legacy Line product offering. Sporting a PSC blower motor and
an Annual Fuel Utilization Efficiency (AFUE) of 95.5%, this
single-stage gas furnace provides efficient comfort for
homeowners. This Legacy Line Gas Furnace also features 4-way
multipoise installation flexibility, and is available in nine model
sizes. The 915S can be vented for direct vent/two-pipe, ventilated
combustion air, or single-pipe applications. A BryantR Air
Conditioner or Heat Pump can be used to form a complete system.
All units meet California Air Quality Management District
emission requirements. These furnaces are approved for
Manufactured Housing (Mobile Home) applications. All sizes are
design certified in Canada.
STANDARD FEATURES
S 4-way multipoise design for upflow, downflow or horizontal
installation.
S Optional through-the-cabinet downflow venting.
S Installation flexibility with a 360-degree rotating elbow.
S Ideal condensing furnace height 35” cabinet: short enough for
taller coils, but still allows enough room for service.
S Silicon Nitride Perfect Lightt Hot Surface Igniter.
S Aluminized-steel primary heat exchanger.
S Stainless-steel condensing secondary heat exchanger.
S High-quality corrosion-resistant prepainted steel cabinet with
hemmed edges for safety.
S Factory-configured ready for upflow applications.
S Direct-vent/sealed combustion, single-pipe venting or ventilated
combustion air.
S PSC blower motor, single-speed inducer motor, and single-stage
gas valve.
S Self-diagnostics
S Approved for Twinning applications (42060 through 60120
sizes, only).
S Propane convertible (See accessory list).
S Approved for Manufactured Housing/Mobile Home applications
(except 140,000 Btuh input) with MH accessory kit.
S Convenient Air Purifier and Humidifier connections.
S Residential installations may be eligible for consumer financing
through the Retail Credit Program.
S Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1-inch water column with all
present air inlets, air outlets, and condensate drain port(s) are
sealed.
LIMITED WARRANTY*
S 10 year parts and lifetime heat exchanger limited warranty to the
original purchaser upon timely registration.
S Limited warranty period is five years for parts and twenty years
for the heat exchanger if not registered within 90 days of
installation.{
* For owner occupied, residen tial application s.
{Jurisdictions where warranty benefits cannot be condition ed on registra-
tion will receive registered limited warranty benefits.
Use of the AHRI Certified
TM
Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.
CERTIFIED
To Next Page
Need help?
General
