Bryant 355BAV Plus 95i User Manual

1
Product Data
355BAV Preferredt Plus 95i
95% AFUE Upflow Only Variable--Speed
Condensing Gas Furnace
Series C, Input Rates 60,000 thru 120,000 Btuh
A05085
Building on our industry--leading condensing furnace
technology, the model 355BAV is our greatest innovation in
comfort control and operating efficiency.
Modern technology provides the Plus 95it design with great
reliability, high efficiency, and ultra--quiet operation. Efficiencies
are above 95 percent Annual Fuel Utilization Efficiency (AFUE).
The model 355BAV Plus 95it Condensing Gas Furnace
incorporates our patented Perfect Heatt Control. This control
interacts with a 2--stage gas valve, a variable--speed inducer
motor, and a variable--speed blower motor, allowing the Plus
95it to adjust combustion air, firing rate, and airflow to maintain
peak efficiency throughout the operating cycle.
The Perfect Heatt system provides the ultimate in heating
comfort while minimizing electrical and gas consumption. The
Plus 95i also features Perfect Humidity control when combined
with a Bryant Thermidistatt Control and air conditioner or heat
pump system.
For even greater comfort and convenience, match the Plus 95i
furnace with a two--speed heat pump to create a HYBRID
HEAT® Dual Fuel system.
FEATURES
Perfect Heatt/Perfect Humidityt Control—This intelligent
heating control constantly monitors operating conditions to adjust
for greater efficiency and comfort. The control operates 90% of
the time in low--heat and reserves the high--firing rate for times
when the heating demand is high. The Perfect Heat/Perfect
Humidity control has these additional features:
S dedicated terminals for electrical connection of electronic air
cleaner and humidifier
S adjustable blower off time
S LED fault code display to aid in servicing
S selectable airflow to match cooling unit
S emergency heat setting
S setting to increase airflow for bypass--type humidifier
S selectable constant fan airflow
S a multi--zone setting for use with zoned air distribution
systems a special dehumidification function increases cooling
comfort by providing greater humidity removal in summer
months
S controls humidity even when there is no heating or cooling
demand
Three--Pass Primary Heat Exchangers—This design
accelerates heat transfer and extracts heat that conventional heat
exchangers waste up the flue. The primary heat exchanger is
made of aluminized steel for corrosion resistance.
Flow--Through Secondary Heat Exchangers—Each cell is
laminated with our patented Everlastict polypropylene for
greater resistance to corrosion and is epoxy coated externally to
prevent oxidation. This breakthrough in heating technology
(Patent No. 4,738,307) helps extend the life of the furnace for
years of reliable performance. The heat exchangers are positioned
in the furnace to extract additional heat from the combustion
products regardless of furnace orientation.
Perfect Lightt Igniter—Bryant’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further
enhances the reliability of Bryant’s 355BAV gas furnace and
continues Bryant’s tradition of technology leadership and
innovation in providing a reliable and durable product.
FanOnPlust—Improves comfort all year long by allowing
you to select the continuous fan speed right at the thermostat.
SmartEvapt—Allows your system to reduce summertime
humidity levels by nearly 10% over standard systems.

Bryant 355BAV Plus 95i Specifications

Operating Characteristics

Fuel Gas Efficiency	95% AFUE
Air delivery	_ _ _ cfm minimum at 0.50 in. wc.

Electrical Requirements

Electrical supply voltage	115 volts
Electrical supply frequency	60 Hz
Electrical supply phase	single--phase

Summary

FEATURES

Perfect Heat™/Perfect Humidity™ Control

Intelligent heating control monitors conditions to adjust for efficiency and comfort.

Three-Pass Primary Heat Exchangers

Design accelerates heat transfer and extracts heat from flue gases for efficiency.

Flow-Through Secondary Heat Exchangers

Patented design for corrosion resistance and extended furnace life.

Perfect Light™ Igniter

Robust SiN igniter for enhanced reliability and durability.

Fan On Plus™

Allows selection of continuous fan speed at the thermostat for comfort.

SmartEvap™

Reduces summertime humidity levels by nearly 10% over standard systems.

DIMENSIONS

PHYSICAL DATA

PERFORMANCE DATA

ELECTRICAL DATA

BRYANT ACCESSORIES

THERMOSTAT AND ZONING CONTROL OPTIONS

Non-Programmable Thermostat Selection

Lists non-programmable thermostat options for various AC/HP applications.

Programmable Thermostat Selection

Lists programmable thermostat options for various AC/HP applications.

Zoning Control Selection

Lists available zoning control kits for different performance series.

AIR DELIVERY - CFM (BOTTOM RETURN WITH FILTER)*

MAXIMUM ALLOWABLE PIPE LENGTH (FT / M)

MAXIMUM ALLOWABLE EXPOSED VENT PIPE LENGTH (FT / M) WITH INSULATION IN WINTER DESIGN TEMPERATURE AMBIENT*

Concentric Vent (Direct Vent/2-Pipe Only) Dimensions

Details dimensions for concentric vent kits for all model sizes.

CLEARANCE TO COMBUSTIBLES

Typical Installations

Illustrates typical installation configurations with various components.

GUIDE SPECIFICATIONS

General

Covers system description, quality assurance, delivery, storage, and handling.

Equipment

Details blower motor, filters, and casing specifications.

ECM Inducer Motor

Describes variable speed design and mounting for vibration reduction.

Primary Heat Exchangers

Details 3-pass, corrosion-resistant aluminized steel design.

Secondary Heat Exchangers

Describes flow-through design with polypropylene coating for corrosion resistance.

Controls

Covers microprocessor control board, self-test, fuse, and operational settings.

Operating Characteristics

Lists heating capacity, fuel gas efficiency, and air delivery specs.

Electrical Requirements

Specifies voltage, amps, wire size, and fuse requirements.

Special Features

Refers to product data for accessories and enhancements.