Do you have a question about the Bryant DELUXE 355AAV and is the answer not in the manual?
blower motor speed | 250-1300 RPM |
---|---|
electrical supply voltage | 115 volts |
electrical supply frequency | 60 Hz |
fuel gas efficiency | 92 to 96.6% AFUE |
---|---|
cooling airflow | 350 or 400 CFM per ton |
air delivery | minimum at 0.50 in. wc. external static pressure |
Achieves industry-leading ultra-high efficiency and optimum comfort through automatic heating level adjustments.
Brings combustion air from outside, minimizing noise and cold drafts for safer, quieter operation.
Integrates furnace with control and accessories for enhanced comfort, humidity, and air quality control.
Actively controls temperature and humidity for optimal comfort year-round, saving energy.
Automatically adjusts heating level to meet exact needs, maximizing low heat for silent operation.
Features aluminized steel and patented Everlastic™ cells for corrosion resistance and durability.
Unique SiN igniter offers robustness and reliability, operating at line voltage without complex regulators.
System feature to reduce summertime humidity levels by nearly 10% over standard systems.
Enhances indoor air quality by allowing easy addition of a high-efficiency Bryant air filter.
Provides limited lifetime warranty on heat exchangers and a 5-year limited warranty on the furnace.
Draws combustion air from outside, ensuring quiet operation and minimizing air infiltration.
ECM motors provide variable-speed operation for optimized comfort and energy efficiency.
Units are CSA certified, meet GAMA efficiency ratings, and California AQMD emission requirements.
Lists compatible non-programmable thermostats for single or two-speed air conditioners.
Details compatible programmable thermostats for various air conditioner and hybrid heat applications.
Provides options for zone control systems, including zone kits, user interfaces, and sensors.
Diagram and instructions for condensate trap setup in upflow furnace installations.
Diagram and instructions for condensate trap setup in downflow and alternate upflow applications.
Diagram and instructions for condensate trap setup in horizontal furnace installations.
Specifies minimum clearances required between the furnace and combustible materials for safety.
Diagrammatic representation of clearances for furnace orientation and vent connections.
Overview of the 4-way multipoise gas-fired condensing furnace for natural or propane gas.
Details design standards, third-party certifications, and efficiency testing procedures.
States warranty coverage details for U.S. and Canada, available upon request.
Specification for the centrifugal blower wheel and variable-speed ECM blower motor.
Details the micro-processor-based integrated electronic control board and its features.
Specifies heating capacity, fuel gas efficiency, and air delivery requirements.
Outlines electrical supply voltage, phase, wire size, and fuse/breaker requirements.