A98508
PROGRAMMABLE THERMOSTAT CONFIGURATION RECORD
Date
Owner/Operator
A) Hardware Configuration
Switch A Zoning Selection. (OFF = Disable, ON = Enable)
Switch B Smart Recovery. (OFF = Enable, ON = Disable)
Switch C Heat Pump Operation. (OFF = Enable, ON = Disable)
Switch D Intelligent Heat Staging. (OFF = Disable, ON = Enable)
Thermostat Model No.
B) Mode Settings
C) Configuration Options
D) Schedule
Hold (On or Off)
Mode (Off, Heat, Cool, Auto, Eheat)
Heating Set Point Value
Cooling Set Point Value
Fan (Auto or On)
1 Anticipator (1-9: factory default = 3)
2 Clean Filter Timer (Off or 1-9: factory default = 2)
3 Fahrenheit or Celsius (F or C: factory default = F)
4 Fan On with W (Off or On: factory default = Off)
5-7 N/A
8
9-12
13
14 N/A
15 Enable Auto Mode (Off or On: factory default = On)
Mon
Tue
Wed
Thu
Fri
Sat
Sun
TIME HEAT COOL TIME HEAT COOL TIME HEAT COOL TIME HEAT COOL
WAKE DAY EVE SLEEP
Auxiliary Heat Lockout (Off or 5-55°F: factory default = Off)
N/A
Room Temperature Offset (-5 to +5: factory default = 0)
—15—
To Next Page
Loading...
Need help?
General
