—12—
Using Your System
Now that you have completed programming your comfort schedule, it is time to use your system.
There are 2 operating modes: normal operation and programming mode. Unless you are programming the times or temperatures of
a zone, the user interface will be in the normal operating mode.
Setting the current day:
If it is not already correct, press the Next Day button until the current day of the week is shown.
A98166
Setting the current time:
1. Press the Set Time/Temp button until the TIME icon flashes.
2. Press the up or down buttons until the desired time is shown, making sure that AM or PM is correct.
3. When you are finished, press the End button to exit. (It will automatically exit after 15 seconds.)
A98167
To Next Page
Loading...