FRONT PANEL
USB INPUTS: Two USB
A
receptacles are
located on the front panel and two more are lo-
cated on the rear panel. These are USB-2 inputs
but are USB-1 compatible. See also item 8 on the
next page
INFRA-RED SENSOR for IR remote controls
such as Bryston’s BR2. The BR2 can remotely
control the basic drive functions (PLAY, PAUSE,
STOP, PREVIOUS,NEXT)
DOT MATRIX DISPLAY: Approximately two
rows of 23 characters and/or graphics
FILE/FOLDER NAVIGATION KEYS: (UP ,
DOWN , LEFT , RIGHT ) Use the UP and
DOWN keys to step through list of connected
USB data devices (flash drives and disk drives).
Then use the Right key to select a device. If
the files are located within nested folders then
navigate through the folders with the and keys
pressing the key to select a folder and load a
list of playable files within the selected folder.
If the PLAY button is pressed at this point, the
BDP-1 will commence playing all song files in
that folder. Folders are identified by a icon
and individual music files are indicated by the
icon. Subsequent playable files will automati-
cally be played from this point in the file list
until the last playable file in the selected folder
is played. See also Operational Notes
FUNCTION KEYS: PLAY, PAUSE, STOP, PREVI-
OUS & NEXT; these keys function in essentially
the same manner here as they would on a CD
player like the BCD-1
POWER SWITCH & LED INDICATOR:
When the LED above the power switch is lit red
the unit is on standby, when it is lit green, the
unit is fully powered up. If your unit is equipped
with a blue/red LED, then blue represents the
power ON state.
See also Remote Trigger section
BDP-1 REAR PANEL:
BDP-1 FRONT PANEL:
To Next Page
Loading...
Need help?
General
