Need help?Do you have a question about the BSA B32 Gold Star and is the answer not in the manual?
Describes handlebar controls like throttle, brakes, clutch, and ignition.
Details operation of foot-operated controls like brake, gear change, and kickstarter.
Explains general controls like petrol tap, lighting, central stand, steering lock.
Pre-driving checks and essential preparations before starting the engine.
Instructions for up and down gear changes for smooth operation.
Guidance on the critical first 1,000-1,500 miles for engine longevity.
Explains the dry sump lubrication system, oil flow, and components.
Routine cleaning, oil checks, and tyre inspection performed weekly.
Maintenance tasks to be performed every 1,000 miles.
Maintenance tasks to be performed every 2,000 miles, including oil changes.
Instructions for front hub and fork maintenance and oil level checks.
Procedures for rear wheel removal and checks for proper wheel alignment.
Steps for adjusting steering head play and valve clearances.
Steps required before cylinder head removal, including tank and plug removal.
Detailed instructions for removing the cylinder head and associated components.
Procedures for grinding-in valves to ensure proper sealing and performance.
Instructions for re-assembling the piston, rings, and barrel.
Procedures for checking electrolyte level and specific gravity.
Maintenance for the combined dynamo and magneto unit.
Details on headlamp, pilot lamp, switches, wiring, speedo, and ammeter.
General| Displacement | 348 cc |
|---|---|
| Compression Ratio | 8.5:1 |
| Carburetor | Amal |
| Front Suspension | Telescopic forks |
| Rear Suspension | Swingarm with twin shock absorbers |
| Front Brake | Drum |
| Rear Brake | Drum |
| Transmission | 4-speed |
| Fuel Capacity | Approx. 3.5 gallons |
To Next Page