Need help?Do you have a question about the BSA b50 series and is the answer not in the manual?
Identifies various controls on the motorcycle, including levers, switches, and pedals.
Information on fuel type and handling for the motorcycle.
Details on twist grip, brake levers, clutch, and other handlebar controls.
Describes petrol taps, steering lock, and master electrical switch functions.
Explains the operation of gearshift, rear brake, stop-light, and starter pedals.
Details on speedometer, revolution counter, and warning lights.
Step-by-step guide for starting the motorcycle engine.
Instructions on how to safely stop the motorcycle engine.
Guidance on the initial running-in period for the new engine.
Items to check weekly for optimal performance and safety.
Maintenance tasks to be performed every 2,000 miles.
Maintenance tasks to be performed every 4,000 miles.
Maintenance tasks to be performed every 10,000 miles.
Maintenance tasks performed based on specific needs or conditions.
Procedure for setting valve clearances on 250cc engines.
Procedure for setting valve clearances on 500cc engines.
Instructions for cleaning the contact breaker points.
How to set the correct gap for the contact breaker points.
Method for timing the spark without specialized equipment.
Information on carburettor jets and float bowl maintenance.
Lubrication tasks required at 250-mile intervals.
Lubrication tasks required at 1,000-mile intervals.
Lubrication tasks required at 2,000-mile intervals.
Lubrication tasks required at 4,000-mile intervals.
Lubrication tasks required at 10,000-mile intervals.
Recommended motor oils and lubricants for the USA market.
Recommended motor oils and lubricants for other countries.
How to adjust and lubricate the primary chain.
Information on tire inflation and wheel bearing maintenance.
Maintenance for speedometer gearbox and rear brake cam spindle.
General advice on maintaining brake efficiency.
Steps for removing the rear wheel assembly.
Steps for removing the front wheel with 8-inch brake.
Steps for removing the front wheel with 6-inch brake.
Information on servicing the front forks, including oil changes.
How to adjust the steering head for play and smooth rotation.
Notes on the rear suspension units and their maintenance.
Overview of the electrical system components and function.
Maintenance for the alternator and zener diode.
Information on ignition coil, capacitor, and switches.
Procedure for checking and adding distilled water to the battery.
Advice on maintaining battery charge and preventing sulfation.
Function of the capacitor and how to run the motorcycle without a battery.
Details on the moto-cross model's alternator and ignition coil.
First stage of brake burnishing procedure.
Second stage of brake burnishing procedure.
Third stage of brake burnishing procedure.
General| Displacement | 499 cc |
|---|---|
| Frame Type | Single downtube |
| Front Suspension | Telescopic forks |
| Rear Suspension | Twin shock absorbers |
| Front Brake | Drum |
| Rear Brake | Drum |
| Ignition | Coil |
| Final Drive | Chain |
| Transmission | 4-speed |
To Next Page