BSR PPC 3 - Erase DTCs; Connect PPC for Erasing; Select and Initiate Erasing

Connect PPC to the car’s diagnostic
connector with the OBDII cable. The
diagnostic connector is located in the
dash board under the steering wheel
(more info about the location at
www.bsr.se/ppc). Turn the ignition on.
Select “Erase DTCs” and press enter.
Press enter to erase DTCs.
Do not forget to turn the ignition on.
How to turn the ignition on is described
at www.bsr.se/ppc.
ERASE DTCS
6