Insert the telephone power supply lead
into the socket marked on the underside
of the telephone. Put the other end of
the plug-in power unit into a 220/230V
electricity socket.
For your own safety use only the
BT approved plug-in power unit
(C39280-Z4-C66) supplied with your
telephone.
To make and receive calls your
telephone needs to be positioned within
range of its base station. The maximum
range inside most buildings is 50 metres.
Outside, the range is extended to
approximately 300 metres (the range will
vary depending on where your Diverse
base station and Diverse Deskphone are
sited, and the conditions within your
building). You can set your telephone
to beep if it is not within range.
See page 23.
Plan the location of your
Diverse Deskphone
Make sure your Diverse Deskphone is
within 2 metres of the phone and mains
sockets.
Put the connector (at the straight long
end of the handset cord) into the
socket marked on the underside of the
telephone. Secure the cord in its
groove. Insert the other end of the cord
into the handset.
Installation
Follow these steps to set up your Diverse Deskphone ready
for use.
2
Connect the Deskphone to
the mains power supply
1
Connect the handset to
the Deskphone
To Next Page
Loading...
Need help?
General
