31
Synergy 4100 – Issue 3 – Edition 1 – 21.08.06 – 7771
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Auto answer
If you set Auto Answer to ON, when you receive an
incoming call and the handset is in the base, you can
pick it up to answer the call. You do not need to
press .
1. Press or until
Handset Settings
is displayed
then select the
OK option.
2. Press or until
Auto Answer
is displayed then
select either the
On
or
Off
option and you will hear a
confirmation tone.
3. Press
and hold to exit and return to standby.
Handset name
You can give your handset a personalised name to
personalise if you are using more than one handset. The
maximum number of characters is 10.
1. Press or until
Handset Settings
is displayed
then select the
OK option.
2. Press or until
Handset Name
is displayed then
select the
OK option.
3. Press to delete unwanted characters and enter a new
name using the keypad.
To Next Page
Loading...
