BT 4100 - Set a User Area

59
Synergy 4100 – Issue 3 – Edition 1 – 21.08.06 – 7771
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Set a user area
1. Press or , TXT Menu is displayed. Select the
OK option.
2. Press or until
TXT Settings is displayed.
Select the
OK option.
3. Press or until
User Boxes Settings is
displayed. Select the
OK option.
4. Press or to highlight the User Box (1 – 4) you
want and select the
Edit option.
5.
Name is displayed, select OK. Enter the name you want,
e.g. Kate, and select
OK.
6.
Password is displayed, select OK.
7. Enter a 4-digit password and select
OK. Re-enter the
password to confirm and select
OK.
8.
Sub address is displayed, select OK.
9. Enter a sub address number which is not already in use
and press
OK, then press Save.
10. Press and hold to exit and return to standby.
Menu
Menu
M
enu
M
enu
Menu
M
enu
Menu
Menu
Text messaging
If you later edit the user box name,
password or sub address, after
making the changes you must also
select
Save from the Box Setup
screen to activate the new settings.