Useful information 31
Default Hub settings
Broadband username (PPP): green-light@service.btclick.com
Broadband password: none required
Encapsulation: PPPoA
Multiplexing: VC based or VC Mux
Wireless network name/SSID:
Wireless key:
The factory settings are printed on your Hub’s pull-out. Make a note of any changes here.
Wireless interface: wi-fi 802.11.b, g or n
Authentication: WPA-PSK or WPA2-PSK
(also known as WPA-Personal)
Encryption type: AES or TKIP
Mode: infrastructure
(not ad hoc)
Hub Admin password:
Your password’s printed under your Hub and on its pull-out. Make a note of any changes here.
To Next Page
Loading...
