BT CALLER DISPLAY 1000 User Manual

You will need 4 x AAA Alkaline
batteries. (not included).
Insert the batteries as shown
in the diagram and replace the
compartment cover.
It is important to maintain the
batteries in your Caller Display
1000. If the battery low icon
appears on the display you will
need to replace the batteries.
It is important to do this as
soon as possible in order to
retain information in the Caller
Display memory and for the
display features to work.
If no batteries are fitted the
display will remain blank.
BT Caller Display 1000_Issue 2_Edition 1_1.10.03
Setting up
4
Follow these easy steps to get
your Caller Display 1000 ready
for use.
Position your Caller Display
1000 close enough to a phone
socket for the telephone line
cord to reach.
Do not stand it on carpets or
other similar surfaces which
might generate fibres.
Do not cover or enclose the
machine. Allow a free flow of
air to its surfaces.
1 Planning the
location of your
Caller Display 1000
Open the battery compartment
at the back of your Caller Display
1000.
2 Install the batteries

BT CALLER DISPLAY 1000 Specifications

General

Brand	BT
Model	CALLER DISPLAY 1000
Category	Caller ID Box
Language	English