BT CD 1500 - Connecting to Wall Socket; Connecting to Telephone

7
Caller Display 1500 – Edition 3 – 23.1.01 – 3435
Warning
When replacing batteries remember
to disconnect the telephone line cord
from the Caller Display base unit.
3 Connect your
Caller Display 1500
to the wall socket
Connect the telephone line cord
supplied into the back of your
Caller Display 1500 and the
adaptor end into the telephone
wall socket.
Battery low warning
When the batteries are nearing the
end of their useful life the display
will flash the battery low icon and
show
CHANGE BATTERIES when in
the idle screen. The display will be
blank if no batteries are fitted or
if the batteries are completely flat.
V
I
P
N
E
W
C
A
L
L
8
8
C
l
e
a
r
M
e
n
u
S
e
l
e
c
t
D
i
a
l
E
x
i
t
retain information in the Caller
Display memory and for the
display features to work.
If no batteries are fitted the
display will remain blank.
4 Connect your
telephone to the
Caller Display 1500
To connect your phone to the
Caller Display 1500, plug the
telephone line cord from your
phone into the socket located
on the back of the adaptor.