EasyManua.ls Logo

BT Decor 2600 - BT Call Blocking: Modes and Status; Changing Blocking Modes and On;Off

BT Decor 2600
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
BT Call Blocking 21
Answer Phone All calls not in your Contacts or Allowed list are sent straight
to the Answer Phone including those on your Blocked list.
To change to Announce or Answer phone:
1. In idle mode, press
.
2. Scroll to Blocking mode, press OK and then scroll and select the mode you
want to use and press OK.
Switch BT Call Blocking on/off
When Call Blocking is set to On, it is On for whichever mode you’re using
(e.g. Announce mode). If you turn Call Blocking Off, all calls will be
allowed through, even if they are already on your blocked list.
1. In idle mode, press
.
2. On/Off is displayed. Press OK and then scroll and select either On or Off
and press OK.
When you receive a call with Call Blocking switched on you will hear the
message, ‘You have a call from xxxx. To accept the call press 1. To always
accept their call, press 2. To block their call, press 3. To send the call to
answer phone, press 4. To hear these options again, press
*
’.

Table of Contents

Other manuals for BT Decor 2600

Related product manuals