10
If you experience any problems, please call the Helpline on 0808 100 9889*
Using your BT eFrame 200
Viewing images
1. After entering the thumbnail mode, press the , , or button (the navigation
buttons on the remote control) to select the thumbnail to view. Press the button to
enlarge the image.
2. To view the previous image, press when an image is enlarged. Press to view the
next one.
Slideshow
This lets you show your pictures off as a continuous slideshow.
1. When in the thumbnail mode, press the button on the remote control,
2. When an image is enlarged, press either the button on the remote control or the
button to enter the slideshow mode.
Stop viewing the slideshow
1. Press to stop at the current full-sized image. To return to the thumbnail mode, press
or the button on the remote control.
Photo rotation & Display ratio:
1 When the display ratio is set to 4:3, an enlarged image can be r
otated by pressing ,
, or the
butt
on on the remote control. Press to rotate the current image
clockwise; press to rotate anti-clockwise.
2. To change the display ratio, press the button on the remote control when in the
Reading Photo mode. Or set the ratio in the setup mode. See “Setup Mode” section.
3. Press the button to return to the previous mode or press the button on the
remote control to return to the main menu.
To Next Page
Loading...