Using your BT eFrame 200
Copying Files
To copy files from an external memory card to the internal memory
You can transfer individual files from an external memory card to the internal memory on
the BT eFrame 200.
1. In Thumbnail mode, use the , , or buttons to select the file that you want
to copy and press on the remote control. An option will appear asking to Copy or Exit.
Choose the option required. The screen then displays Copy done once the file has been
copied. Press to go back to the Thumbnail mode.
2. Repeat this for all of the files that you want to copy and then press to go back to the
Thumbnail mode.
Note
If you try to transfer pictures to the internal memory when it is already full, the screen
will display an error message.
To copy files to and from a PC to the Internal Memory or an External Memory card
When connected to a PC via the USB cable (supplied), your BT eFrame 200 will act exactly
like a card reader. It can be accessed via any Windows user interface. Pictures, video clips and
MP3 files can be copied, moved or deleted in exactly the same way PC files are manipulated.
1. Plug the USB cable into your BT eFrame 200 and connect the other end to the USB port on the PC.
2. At your computer, click on
Start and select My Computer. You will see 3 new drive letters
on your PC. Each card slot represents:
• Internal Memory
• External Memory card (e.g. SD / MS)
• USB 2.0 drive
15
If you experience any problems, please call the Helpline on 0808 100 9889*
To Next Page
Loading...