9
Using your BT eFrame 200
Switching the frame on
1. Plug the mains power adaptor into the side of the frame.
2. To read files from a memory card, insert an appropriate memory card into the side of the frame.
3. Press the
POWER button to activate. The main menu is displayed.
Select and press
ENTER.
4. The frame will automatically recognise image or video files saved in a memory card or in
the internal memory, and it will display all image or video thumbnails.
5. To start viewing images or playing video clips, see the “Viewing Images” or “Playing Video
Clips” section.
6. To return to the main menu, press the button or the button on the remote
control. To enter the thumbnail mode again. Select and press
ENTER.
7 To delete an image or video clip from thumb nail mode, press , , or to
select the image or video file that you want to delete. Press on the r
emote control to
delete the current image or video file, press to confirm or to exit.
IMPOR
T
ANT
When an external card is inserted, the frame will always default to look at the external
card first. To access the internal memory simply remove any external card.
If you experience any problems, please call the Helpline on 0808 100 9889*
To Next Page
Loading...