Meet your
Mini Hub
Let’s get started
Turn it on
Plug in the Mini Hub to start charging its
battery, and switch it on.
The signal indicator light will turn solid blue
when it’s connected to the network and you
have a good signal.
Connect your devices
In the wi- settings menu on your device,
look for the name of your Mini Hub. You can
see it on the password card.
Once you’ve clicked ‘connect’, enter the
password for your Mini Hub. This is also on
the password card. And there you go. You’re
ready to get online with free unlimited data.
We’ll keep you connected
As a BT Plus customer, if you’re ever without
a broadband connection we’ll activate this
Mini Hub.
It can connect up to twenty devices to free
unlimited data – so you’ll stay online.
We’re busy sorting your broadband
We’ll let you know when your broadband’s
up and running. And, once you reconnect
your devices to your Home Hub, we’ll turn
o the data to your Mini Hub.
This Mini Hub’s yours to keep
Keep it somewhere safe. If you need your
Mini Hub in the future, contact us. We’ll be
ready to reactivate it.
To charge your Mini Hub
Use the Micro USB cable or other suitable
charger. Once it’s charged, you’re ready to
go. Keep the power button pressed down
for a few seconds to turn your Mini Hub on.
Keeping it plugged in for a long time?
It’s best to remove the battery – otherwise
the Mini Hub might overheat.
The power indicator will tell you how
much battery is left:
• a solid blue light = you have
enough power
• a ashing blue light = it’s charging
• a solid red light = the battery’s
lower than 20%
To Previous Page
Loading...
Need help?
General
