1
2
1 Plug the hotspot directly into a wall power socket near the device you want
to connect. Make sure the socket’s switched on.
2 Wait for connection to complete. Give it a couple of minutes. If everything’s okay,
the Wireless, WPS/Link and Power lights will be on.
If the WPS/Link light doesn’t light up, see Connection help overleaf.
2 Plug in your home hotspot
Wireless
Power
WPS/Link
Mini Wi-Fi Home Hotspot
3 Connect your devices
You can connect your devices using wi-fi or the ethernet cable.
The hotspot can support separate devices connected to the ethernet ports and wi-fi
at the same time.
To Next Page
Loading...
