Light status
Mini Wi-Fi Home Hotspot
Light Colour Status What’s happening
Power Green
On Hotspot running normally
Flashing Hotspot pairing
Green Slow flashing Hotspot in power saving mode
- Off Hotspot turned off or boot-up failed
WPS/Link Green On Hotspot connected to network, high transfer speed
Green Flashing Hotspot connected to network, low transfer speed
- Off Hotspot booting-up or boot-up failed or hotspot not connected
to network
Wireless Green On Wireless enabled, data is being transmitted/received
- Off Hotspot booting-up or boot-up failed, or hotspot wireless disabled
Orange On Wireless security disabled on the hotspot or guest network
Green/Orange Slow flashing Wi-Fi cloning in progress
Green/Orange Fast flashing Wi-Fi cloning failed
Broadband Extender 600
Light Status What’s happening
Power On Extender running normally
Flashing Extender resetting, synchronising or power save mode
Off Extender turned off
Ethernet On Device connected to extender
Flashing Data being sent or received
Off No device connected to extender or device switched off
Data On Extender connected to network
Green: High transfer speed
Orange: Medium transfer speed
Red: Low transfer speed
Off No connection to network
WPS/Link & Reset Buttons
What do you want to do? Press and hold
Prepare to join a new network WPS/Link button for 5 to 8 seconds
Join a new network or start WPS connection WPS/Link button for 1 second
Reset to factory settings Reset button for 1 second
Wi-Fi cloning
WPS/Link button for 15 seconds
To Next Page
Loading...
