59
BT Paragon 500 – Edition 4 – 10.05.04 – 5840
General information
Connecting to a switchboard
This product is intended for use within the UK for connection to public telephone network
and compatible switchboards, which support tone dialling and timed break recall. If in
doubt please consult your service provider.
Switchboard external line access code
You may need to enter an access code (e.g. 9) in order to get an outside line. So that the
switchboard has time to pick up an outside line, you may also need to add a Pause after
the access code. You can do this as part of setting the access code.
Set access code and Pause
1. Press scroll to
ACCESS CODE
and press .
2. Press or to set
ACCESS CODE ON
then press .
3. Enter the access number – up to 3 digits.
4. If required, press and press . Display shows
ACCESS CODE COMPLETED
.
When the access code is switched On, it will be dialled automatically when dialling from
the phonebook.
Access code On/Off
1. Press scroll to
ACCESS CODE
and press .
2. Press or to switch between
ACCESS CODE ON
/
OFF
then press to confirm.
To Next Page
Loading...
