BT SYNERGY 3505 - Auto Talk; Name Handset

26
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
Auto talk
When the handset it on the base, you can answer a
call just by picking it up. When auto talk is switched off,
you will always have to press to answer a call.
The default setting is On.
1. Press then to display
HANDSET .
2. Press then to scroll to
AUTO ANS and press .
3. Press or to select
ON or OFF and press to
confirm.
4. Press and hold to return to standby.
Name a handset
The handset name is pre-set to
SYNERGY . You can
personalise each handset to the name you want, using
up to a maximum of 8 characters.
1. Press then to display
HANDSET .
2. Press then to scroll to
NAME and press .
3. Press to delete the current name and then use the
keypad to enter a new name and press to confirm.
4. Press and hold to return to standby.
Handset settings
Use the button to correct any
mistakes.
5675 BT Synergy 3505 UG [4] 11/11/03 4:05 PM Page 26