54
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
The display shows
BS 1 2 3 4
. The numbers that are
flashing indicate other bases that the handset is already
registered to.
2. Enter - for the base you want to register to,
followed by your base PIN (original setting 0000) then
press .
The display shows
SEARCH 1
,
2
,
3
,
4
. and flashes
until the handset locates the base.
When the base is located, the handset will be
automatically selected and shown on the display.
De-register handsets
1. Press then scroll to
SETUP
and press .
2. Scroll to
DEL HS
and press .
The display shows
PIN?
3. Enter your PIN (original setting
0000
) and press .
4. Scroll or to select the handset (1-5) you want to
de-register then press .
Display shows
CONFIRM?
5. Press to confirm.
Once deregistered, the handset display shows
NOT REG
.
Additional handsets & bases
If the handset does not find the
base, it will return to the previous
menu. If this happens, try
registering again using a different
base number. Make sure you are
close to the base.
You cannot deregister the handset
you are using.
5675 BT Synergy 3505 UG [4] 11/11/03 4:16 PM Page 54
To Next Page
Loading...
