Welcome
Thanks for buying a BT Baby Monitor. You’ll soon be able to relax knowing you can watch and listen for your baby’s
every breath, gurgle and wriggle. But first things first. To get set up, just follow the steps opposite. If you need any
help, go to bt.com/producthelp or give us a call on 0808 100 6554*
Important safety notices
1. Your baby monitor is designed as just an aid.
It isn’t a substitute for responsible and proper adult supervision.
2. Make sure all cables and units are out of your baby’s reach – at least one metre away.
3. Never cover either unit, put them in moist places or inside the cot, bed or playpen.
4. If you travel abroad, check the voltage on your unit’s plugs match the local power output.
5. Do not take the product apart. You can’t change the battery installed in the Parent unit. If you need repairs, get
in touch with our help desk
Getting set up
1. Plug the cable into the Parent unit, then plug it into the mains power socket and switch the socket
on.
2. Leave to charge for 12 hours.
Tip
The first time you use the Parent unit, or if you haven’t used it for a long time, it’ll take 12 hours to fully charge.
The battery life on a single charge lasts for 4 hours. We recommend you keep the cable plugged into the mains
To Next Page
Loading...
