BT YouView - The main menu; Q Search; Settings

Controlling your TV with your YouView remote
You can set your YouView remote to control both
your YouView box and your TV. Here’s how.
After putting the batteries in your remote, turn on
your TV, then…
1 Hold down
and until the blue light on the
remote ashes three times.
2 When the ashing stops, enter the four-digit code for your
brand of TV (see the table on the right). The blue light will
ash another three times.
3 Hold down
until your TV turns o. The blue light will
blink while it turns o.
4 When your TV turns o, let go of
and press it again –
your TV should turn back on. Next try Vol
, Vol .
5 If the volume control works, press
. And that’s it!
If it doesn’t work, start again from Step 3.
TV brand Code
Goodmans 2037
Hitachi 2424
JVC 2788
LG 2992
Panasonic 3846
Philips 3951
Samsung 4483
Sharp 4848
Sony 4985
Toshiba 5523
If your brand of TV isn’t listed here, you
can nd a full list of brands and codes at
bt.com/help/remote
Using your remote to switch to another device
When switching to another device on your TV (e.g. a
games console), press
on your remote, then keep
pressing
(not the up or down arrows) to scroll
through your choices (e.g. HDMI 1).
Maximum volume too low?
If you need to change the volume on your YouView
+
box after setting up your remote, hold down
AD
while pressing Vol
, Vol .
Once you’ve set up your remote,
you can:
• turn your TV on and o (standby)
• switch to another device
• adjust or mute the volume.