34
2.3CH NAME Channel alias setting- MENU 16澔
The walkie talkie is allowed to set and display the channel alias, up to 6 digits, which can be letters or
numbers. The set-up steps are as follows:
1. Press the [MENU] key to enter the main menu, press the cd key to enter
the MENU 16,
LCD should display as:
2. Press the [MENU] key again to enter the CHNAME menu,
the first digit of the current alias flashes to remind you to edit it.
3. Press the cd key to select A/B/C…X/Y/Z letters and 0-9 numbers. Press the [MENU] key to confirm.
4. The second digit flashes to indicate that editing is allowed. Press the / key to select A/B/C…X/Y/Z letters
and 0-9 numbers.
Note: Press UP key to jump forward in sequence. Press the DOWN key to jump in reverse order.
5. Press the [MENU] key to confirm your selections.
6. Press the [W
] key to go back through each selection.
7. Press the [PTT] key to exit the menu mode.
To Next Page
Loading...