Need help?Do you have a question about the BTECH FRS-A1 and is the answer not in the manual?
General| Brand | BTECH |
|---|---|
| Model | FRS-A1 |
| Category | Transceiver |
| Language | English |
Details FCC RF exposure guidelines for hand-held and body-worn operations.
Specifies the required spacing for hand-held operation to comply with FCC RF exposure.
Explains compliance for body-worn operations using supplied accessories.
States compliance with FCC Part 15 rules and conditions for operation.
Lists safety instructions and prohibitions related to battery charging.
Offers suggestions for device care and safety to ensure warranty and longevity.
Warns against operating the radio in hazardous environments like those with explosion risk.
Instructions on how to power the radio on and off using the rotary knob.
How to adjust the radio's volume level using the rotary knob.
Guide to selecting FRS channels and privacy codes for communication.
General steps for navigating and using the radio's menu system.
Configuring receiving privacy codes (CTCSS/DCS) for each channel.
Configuring transmitting privacy codes (CTCSS/DCS) for each channel.
Adjusting the squelch threshold for noise reduction and interference filtering.
Setting the LCD backlight to ON, OFF, or KEY activation mode.
Enabling or disabling beep tones for key presses.
Configuring VOX sensitivity levels for hands-free operation.
Selecting between high and low power for transmission based on range/environment.
Enabling dual watch to monitor two channels simultaneously.
Adding or deleting channels from the scan list for active scanning.
Activating power saving mode to reduce battery consumption.
Setting transmission time limits to prevent long transmissions and conserve battery.
Locking busy channels to prevent accidental transmission on an occupied channel.
Selecting and listening to different call tones for alerts.
Turning voice prompts on or off for menu navigation and operations.
Configuring how channel information is displayed: name, frequency, or number.
Setting custom aliases (up to 6 characters) for channels.
Procedure to reset the radio to its original factory default settings.
To Next Page