BTECH UV-2501 - Ex: Programming a Channel Repeater Offset with CTCSS Tone

VISIT!BAOFENGTECH.COM!AND!MIKLOR.COM!FOR!DOWNLOADS!AND!HELP!
19!
!
!
Ex: Programming a Channel Repeater Offset with CTCSS
Tone
EXAMPLE!New!memory!in!Channel!99:!
RX!=!145.000!MHz!
TX!=!145.600!MHz!(This!is!a!(+!.60 0 )!O ffse t)!
TX!CTCSS!tone!123.0!
1. Change!from!Menu!to!Menu!by!pressing!the![EXIT/AB]!button.!
2. Set!radio!to!VFO!Mode!!by!pressing![V/M]!!
Channel%number%at%the%right%will%disappear.%
3. Menu%37! [M]! 9!9! [M]! [EXIT]!! !Deletes!Prior!Data!in!channel!(Ex.%99)%
4. Menu!13! [M]! 123.0! [M]! [EXIT]!! !Selects!desired!TX!encode!tone!%
Ø Use![A/B]!to!select!Up per!display!->!Enter!RX!frequency!(Ex.%145000)%
Ø Use![A/B]!to!select!Low er!display!->!Enter!TX!frequency!(Ex.%145600)%
5. Select!Upper!Display! Use![A/B]!key%
6. Menu!36! [M]! 9!9! [M]!Enter!the!desired!channel!(Ex%99)%
Ø [EXIT]! RX!has!been!added%
7. Select!Lower!Display! Use![A/B]!key%
8. Menu!36! [M]! 9!9! Enter!the!same!channel!(Ex%99)%
Ø [EXIT]! TX!has!been!added%
9. [V/M]!!Return!to!MR!Mode.!Channel!number!will!re-appear.%