BTECH UV-25X2 - Remote Control Functions; Remote Kill Functionality; Remote Revive Functionality

38!
VISIT!BAOFENGTECH.COM!AND!MIKLOR.COM!FOR!DOWNLOADS!AND!HELP!
!
!
!
UV-25X2!/!UV-25X4!/!UV-50X2!
!
!
!
accept!DTMF!signaling)!it!will!command!the!radio!to!disable!transmitting! ab ilities.!The!Master!ID!
station!must!first!identify!and!send!the!PTTID!(set!in!software!as!“Master!ID”)!–!once!the!Master!
Station!identifies !its elf,!t h e!ra d io !is!s e t!to !re c eiv e !co mman d !t on e s ,!if!th e!Monit o r!Remote!Stun!ton e!
is!receive d !-!the!radio!w ill!no!lon ger!b e!ab le!to!tran sm it.!Both%the%master%ID%station%and%remote%
stun%signal%must%be%set%up%in%software.%
!
Remote!Kill!
First!set!the!DTMF!Remote!Kill!Tone!and!Master!Control!ID!in!Software :!When!your!radio!receives!
the!DTM F!R em o te!Kill!Ton e!Se qu en ce !(Set!by !softw are )!(Re qu ires!M en u !18!and!19!to!acc ept!D TMF!
signaling)!it!will!command!the!radio!to!disable!tran sm itting!a nd !rece iving.!Th e!M a ster!ID!sta tion!
must!first!identify!and!send!the!PTTID!(set!in!software!as!“Master!ID”)!–!once!the!Master!Station!
identifie s!it se lf,!th e !ra d io!is !s et !to !re ce ive !c o m mand !to n e s,!if!t he !Monito r !Remote!Kill!tone!is!
received!-!the!radio!w ill!no!long er!be !able!to !trans m it!or!receive.!Both%the%master%ID%station%and%
remote%stu n%signal%must%be%set%up%in%software.%
%
Remote!Revive!
First!set!the!DTMF!Remote!Revive!Tone!and!Master!Control!ID!in!So ft ware: !When!your!radio!
receives!the!DTMF!Remote!Revive!Tone!Sequence!(Set!by!software)!(Requires!Menu!18!and!19!to!
accept!DTMF!signaling)!it!will!reactivate!the!radio!after!it!has!been!remotely!stunned!or!killed.!The!