BTECH UV-25X2 - Scanning Modes Operation; Overview of Scanning Modes; Time Operation (TO) Mode; Carrier Operation (CO) Mode

VISIT!BAOFENGTECH.COM!AND!MIKLOR.COM!FOR!DOWNLOADS!AND!HELP!
41!
!
!
Scanning!modes!
The!scann er!is!configurable!to!one!of!three!ways!of!operation:! Time,!carrier!or!search,!each!of!
which!is!explained!in!further!details!in!their!respective!section!below.!
Procedure!5.1.!Setting!scanner!mode!
1. Press!the! !key!to!enter!the!menu.!
2. Enter!“17”!on!your!numeric!keypad!to!come!to!scanner!mode.!
3. Press!the! !key!to!select.!
4. Use!the! !and! ! ke ys!to!select!scanning!mode.!
5. Press!the! !key!to!confirm!and!save.!
6. Press!the! !key!to!exit!the!menu.!
Time!operation!
In!Time!Operation!(TO)!mode,!the!scanner!stops!when!it!detects!a!signal,!and!after!a!factory!pre-set!
time!out,!it!resum es !scan nin g.!
Carrier!operation!
In!Carr ier !O p e ra tio n!(CO) !m o de,!the!s c an n e r!s to ps!wh e n !it!d e te c ts!a !s ign a l,!a n d !a fte r!a !fa ct o ry !
preset!time!with!no!signal!it!resumes!scanning.!
!