Bticino CLASSE 100X16E - User Manual

1
www.bticino.com
ST-00000695-
344682
B
A
C
2
9
3
4
5*
7
6*
1
101112
8
A B C
164 mm 165 mm
20,5 mm
17/03/2020EN
Classe100 X16E 2 WIRES / Wi-Fi handsfree
video internal unit with inductive loop
Legend
When pressed, the keys light up and emit a “beep” (that can be deactivated by procedure).
1. Loudspeaker
2. 5” (16:9) display
3. Wi-Fi signal notification LED
Red LED flashing: WI-FI on but not connected to the network
LED off: WI-FI disabled or working correctly
Red LED on steady: Classe100 X16E is exchanging data with the Door Entry
CLASSE100X App (automatic switch on)
4. Bell exclusion notification LED
Red LED flashing: bell excluded
5. Programmable touch keys *
6. Door lock release touch key *
White LED flashing: active Professional Studio (Office) function
7. Entrance panel / scrolling activation touch key
8. Tactile guides for the blinds
9. Communication disabling key
Red LED flashing: call in progress
10. Microphone
11. Staircase light touch key
12. Communication enabling key
Green LED flashing: incoming call
* If the LEDs flash white when pressed, the “safe door lock” function is active and
the key is deactivated.
Front view
2 WIRES / Wi-Fi handsfree video internal unit with inductive loop and 5” colour LCD
display.
It has 2 physical keys for the control of the main video door entry functions – answer
and end a call – and 3 capacitive keys that allow the door lock release, the entrance
panel activation/scrolling, the staircase light control and the customisation of most
frequently used quick actions – e.g. intercom, additional door lock activation, generic
activations.
The device has a side lever to adjust: colour, brightness and display contrast, audio
volume, call tone volume and Wi-Fi configuration.
There are call exclusion notification LEDs and Wi-Fi.
Also, thanks to the Wi-Fi connection, you can associate the video internal unit to the
Door Entry CLASSE100X app (available for Android and iOS).
You can manage the main video internal unit functions (receiving calls, opening
the door lock, activating the entrance panel/scrolling, FWR updating and additional
activations) from the app.
The installation can be made to the wall using the bracket or using table base.
Description
Dimensional data
344692 Tabletop support
Related items
Power supply: 18 – 27 Vdc
Maximum SCS absorption in Stand by: 37 mA
Maximum SCS absorption in operation: 400 mA
Maximum cable section for each clamp: 2 x 1 mm
2
Operating temperature: 5 – 40 °C
Wireless device in compliance with 802.11b/g/n standard, frequency 2.4 – 2.4835 GHz;
transmission power < 20 dBm. WEP/WPA/WPA2 safety protocol.
Teleloop: frequency 0 – 9 kHz, transmission power < 1.005 A/m.
Ports and protocols used by Classe100 X and DoorEntry App
- 5228 SIP (used by Classe100 X and mobile app)
- 0 to 65000 UDP (runtime negotiated for multimedia streaming)
- 8883 MQTT (used by Classe100 X for Cloud connection)
- 80/443 HTTP/HTTPS
Technical data

Summary

Product Description and Specifications

Key Features and Overview

Detailed description of the handsfree video internal unit and its capabilities.

Technical and Dimensional Data

Covers power, absorption, cable section, temperature, dimensions, and wireless standards.

Device Interface and Controls

Front View Components

Identification of visible components on the front of the device.

Control Legend and LEDs

Explains the function of keys, LEDs, and other indicators.

Rear View and Configuration

Rear View Components

Identification of rear-view connectors, switches, and sockets.

System Configuration Setup

Details internal unit numbering (N), entrance panel association (P), and operating modes (M).

Functional Modes (Part 1)

Basic Mode Functions (M=00, M=01)

Defines intercom, EP activation, and door lock release for base modes.

Modes with Studio;Pager (M=20, M=40, M=80)

Adds Professional Studio and Pager functions to basic modes.

Functional Modes (Part 2)

Intercom and Door Lock Modes (M=02, M=22, M=42, M=82)

Covers intercom, EP activation, and door lock release for specific modes.

Functional Modes (Part 3)

Intercom and Door Lock Modes (M=03, M=23, M=43, M=83)

Covers intercom, EP activation, and door lock release for specific modes.

Functional Modes (Part 4)

Door Lock and Actuator Control Modes

Details door lock release and actuator control for various modes.

Multiple Door Lock Control Modes

Describes control of multiple door locks across different modes.

Functional Modes (Part 5)

Intercom and Panel Activation Modes

Manages intercom calls and entrance panel activations for several modes.

General Intercom and Panel Access Modes

Controls general intercom and entrance panel access for specific modes.

Apartment Intercom and Access Modes

Manages intercom and access within apartments for specific modes.

Functional Modes (Part 6)

Apartment Intercom Variations

Details intercom functions among apartments for various modes.

Cable and Distance Specifications

Line Distances to Entrance Panel

Maximum distances for Line A and Line B with different cable types.

Power Supply and Door Lock Distances

Maximum distances for Line C (power) and Line D (door lock).

Wiring Diagrams - Multi-Family Systems

Example of Multi-Family System

Shows a basic wiring example for a multi-family system.

Wiring Diagrams - Additional Units

Multi-Family with Additional Units

Illustrates wiring with additional internal units in multi-family systems.

Wiring Diagrams - Advanced Systems

Multi-Family System with Nodes

Wiring example for multi-family systems with nodes and power supply.

Wiring Diagrams - Single;Two-Family

Single-Family System Example

Wiring diagram for a single-family installation.

Two-Family System Example

Wiring diagram for a two-family installation.

Device Adjustments and Settings

Joystick Navigation and Control

Explains how to use the joystick for menu navigation and selections.

Symbol Legend for Controls

Provides a legend for the joystick symbols and their actions.

Wi-Fi Adjustments and Settings

Wi-Fi Network Management

Navigating Wi-Fi settings for network display and connection.

Ringtone Volume Adjustment

Adjusting the ringtone volume level through the settings menu.

Wi-Fi and Device Settings

Wi-Fi Settings Menu Options

Options for enabling/disabling, resetting Wi-Fi, and first association.

Device Information and Exit

Accessing device info and exiting the settings menu.

Audio and Function Settings

Ringtone Volume Adjustment

Step-by-step guide to adjust the ringtone volume.

Professional Studio Function

How to enable/disable the Professional Studio (Office) function.

Wi-Fi Network Configuration

Displaying and Managing Wi-Fi Network

Viewing connected Wi-Fi network and disabling connection.

Wi-Fi and Device Reset Options

Procedures for resetting the Wi-Fi network or the entire device.

Wi-Fi Network Management

Enable;Disable Wi-Fi

Steps to enable or disable the Wi-Fi network connection.

Resetting Wi-Fi Network

Procedure to reset the Wi-Fi network and reconnect.

Device Management and Information

Device Reset Procedure

Steps to perform a factory reset on the device.

Device Information Display

How to view device information like IP address and firmware version.

Audio;Video Parameter Adjustments

Adjusting Speaker Volume

How to adjust speaker volume during a connection.

Adjusting Image Parameters

Adjusting image brightness, contrast, and color.

Settings Menu Navigation

Accessing and Navigating Settings

How to access and navigate the main settings menu.

Key Sound and Ringtone Settings

Options for enabling/disabling key sound and associating ringtones.

Key Sound and Ringtone Configuration

Enable;Disable Key Sound

Procedure to enable or disable the beep sound on key presses.

Associate Call Ringtones

How to set ringtones for different types of calls.

Advanced Functions

Ringtone Association Process

Continuing the process of associating ringtones to calls.

Door State and Paging Functions

Explains Door State notification and Paging function usage.

Special Functions

Safe Door Lock Function

How to enable the Safe Door Lock function to prevent unauthorized opening.

Inductive Loop Usage

Instructions for using the inductive loop with hearing aids.

Door Entry CLASSE100 X App Integration

App Interaction and Features

How to interact with the device using the CLASSE100X app.

App Download and Association

Information on downloading and associating the mobile app with the device.

Bticino CLASSE 100X16E Specifications

General

Type	Intercom System
Model	CLASSE 100X16E
Brand	Bticino
Connectivity	Wired
Display technology	LCD
Mounting	Wall-mounted
Colour	White
Hands-free communication	Yes
Number of Lines	1
Operating Temperature	0 to 40 °C