WIRING DIAGRAMS
Large house with automation system
The two wire sound system can also be used with MY HOME automation.
This is brought about by using an SCS/SCS interface Item F422, where the
sound system BUS is connected in output (OUT) and the automation BUS is
connected in input (IN) (the interface does not require confi gurations). Both
the sound system and the automation system can be managed by a TOUCH
SCREEN. The system proposed has automation controls, a series of amplifi ers
and loudspeakers, a stereo control to control a Hi-Fi system, a radio tuner
and an RCA input. Using a scenario module you can: save the switching on of
the sound system, switch on the lights and raise the rolling shutters with just
one pushbutton.
List of material needed to make the system
Item Description Quantity Reference
346000 Power supply 1 A
F441 Audio/video node 1 B
L/N/NT4560 RCA input 1 H
L4561 Stereo control 1 C
F500 Radio tuner 1 G
L4562 Flush-mounted amplifi er 7 D
L/N/NT4565 Flush-mounted loudspeakers 14 E
L/N/NT4683 TOUCH SCREEN 1 I
F422 SCS/SCS interface 1 L
3499 Line terminator 3
33698...(2/3/4)
8-contact connector 1 F
336904 Twisted cable with 2 conductors 1
NOTE: the above system can also be achieved with AXOLUTE Items
AUTOMATION
SYSTEM
Star centre
E
E
E
E
E
E
E
E
E
E
D
D
H
D
D
L
E
E
I
D
E
E
D
F
C
G
B
A
D
STAR CENTRE
To Next Page
Loading...
Need help?
General
