Bticino Sfera Keypad Module Installer Manual

Sfera Keypad Module
Installer manual
21
8 The device emits a
long confirmation
beep.
7 Re-enter the code to
confirm.
During programming, some rules must be followed:
- keys must be pressed consecutively (maximum 2 seconds between pressures);
- the programming sequence must be started within 30 seconds from the moment the
programming pushbutton has been pressed and must be completed in one stage.
9 If the procedure has been
successful the green
LED stays on for approxi-
mately 1 second before
switching off.

Bticino Sfera Keypad Module Specifications

General

Brand	Bticino
Model	Sfera Keypad Module
Category	Control Unit
Language	English