Need help?Do you have a question about the BTL 4000 Series and is the answer not in the manual?
Overview of the BTL-4000 Series physiotherapy units and their modular design.
Explanation of the top panel components and their operational functions.
Identification and description of connectors and controls on the rear and front panels.
Instructions for unpacking, assembly, and proper placement of the equipment.
Understanding display elements, buttons, information texts, and channel selection.
How channel tabs display connected accessories and their operational status.
Visual representation of the process for setting up and starting a therapy session.
How to select therapy parameters using the diagnosis list and the DIAG key.
How to select therapy parameters using pre-defined programs via the PROG key.
Step-by-step guide for manually setting all therapy parameters using the MAN key.
Procedure for setting the duration of a therapy session on the parameters screen.
How to adjust intensity levels for ultrasound, laser, magnet, and electrotherapy.
Detailed steps for initiating, pausing, and terminating therapy sessions on the device.
Explanation of the information displayed during an active therapy session.
Specifics on setting intensity for 4-electrode and interference electrotherapies.
Guide to understanding the blue and green pilot lights on various accessories.
How the device screen and accessory indicate electrotherapy voltage and current output.
How the device indicates ultrasound generation and contact status.
Visual and audio cues for laser irradiation and magnetotherapy field presence.
Explanation of adjustable therapy parameters available in manual mode.
How to access and use the device's built-in encyclopaedia for therapy information.
Procedure for saving customized therapy settings as diagnoses or programs.
Instructions for connecting the BTL-4000 Puls or Combi unit with the BTL Vac vacuum unit.
Guide for linking the BTL-4000 Puls and BTL-4000 Sono units for combined therapy.
Diagram and table for interconnecting multiple BTL-4000 units for complex therapies.
Steps for configuring and operating combined electrotherapy and ultrasound therapies.
Procedure for safely stopping combined therapy sessions before completion.
Navigating the Accessories menu for installation and information.
Accessing and configuring various unit settings like display, sound, and password.
Adjusting display contrast, backlight, language, and key arrangement.
Configuring auto-off, operation style, unit information, and unlock codes.
Performing disk scans, file system formatting, and drive information checks.
Accessing and adjusting special settings that vary by generator type.
Managing custom therapy sequences and programs created by the user.
Setting parameters for individual sections within a therapy sequence.
Procedure for saving newly created therapy sequences.
Running, editing, and deleting user-created diagnoses and programs.
Reviewing and re-running previously performed therapies.
Information on the required 60W and 90W power supply adapters for the device.
Details on the built-in accumulator, its charging, and status indication.
Listing of accessories applicable to all units and specific to electrotherapy.
Listing of accessories for ultrasound therapy and laser therapy treatments.
Listing of accessories specifically designed for magnetotherapy.
Guidelines for cleaning, fuse replacement, and transport/storage of the equipment.
Essential safety rules and warnings for operating the medical device.
Specific safety measures and warnings when performing electrotherapy.
Safety advice and precautions for using ultrasound therapy equipment.
Critical safety measures and warnings for laser therapy applications.
Important safety advice for operating magnetotherapy devices.
List of conditions and situations where electrotherapy should not be applied.
Conditions and situations where ultrasound therapy is contraindicated.
Situations and conditions that contraindicate the use of laser therapy.
Conditions where magnetotherapy is not recommended or requires special attention.
Details on the product warranty provided by the manufacturer.
Comprehensive technical data for the BTL-4000 physiotherapy devices.
Technical details and operating conditions for the 60W and 90W power supply adapters.
Key adjustable and fixed parameters for the electrotherapy generator.
Technical specifications and adjustable values for the ultrasound generator.
Technical data related to laser output, frequency, dose, and area.
Parameters for magnetic field strength, pulse shapes, frequency, and modulation.
Technical details for the small and large BTL-237 ultrasound heads.
Technical data for BTL-448 laser probes with red and infrared radiation.
Technical data for BTL-445 laser clusters with red, infrared, and combined radiation.
Dimensions, weight, and intensity of BTL-239 magnetic applicators.
List of IEC, EN, ISO, and MDD standards the equipment complies with.
Information on which BTL-4000 series devices can be interconnected.
Details about the manufacturer, BTL Industries Ltd., and contact information.
Configuration options for various combined BTL-4000 series devices.
Configuration details for BTL-4000 Puls electrotherapy devices.
Configuration options for BTL-4000 Sono ultrasound therapy devices.
Configuration details for BTL-4000 Laser therapy devices.
Configuration options for BTL-4000 Magnet therapy devices.
General| Preset Protocols | Yes |
|---|---|
| User Protocols | Yes |
| Patient Database | Yes |
| Identification of electrodes and cables | Yes |
| Type | Electrotherapy unit |
| Timer | Yes |
| Power Supply | 100-240 V, 50/60 Hz |
| Therapy Modes | Galvanic, Diadynamic, TENS, Two-pole Interference, Four-pole Interference, Isoplanar, Russian Stimulation, HVS, Microcurrent, Rectangular, Triangular, Trabert, Exponential, Combined |
To Next Page