Btwin ELOPS 900E - Displays Error Code on the Control Screen; Troubleshooting Fault Codes

16
Displays error code on the control screen
Fault code
De󰄈nition Solutions
15
Bad connection between
the control screen and
the controller
Check that all connectors are pressed in properly
33
Connection error Check that all connectors are pressed in properly
35
Motor connector fault Press in the motor connector properly
36
Motor fault
Appointment at your Decathlon regional
workshop to repair your bike
37
Brake sensor fault
Check that the brake connectors are pressed in
properly
38
Battery discharged Battery charger
39
Bad connection between
the control screen and
the controller
Check that all connectors are pressed in properly
Motor cable connector
Cable accessories connector
Pedalling sensor connector
Rear light connector
Front light connector
Motor connector
Control screen connector
Brakes connector