Btwin ELOPS 900E - PRODUCT DESCRIPTION; Electrically-assisted bike technical features; General operation of the electrical assistance

6
PRODUCT DESCRIPTION
Electrically-assi󰄋ed bike technical features
A
B
C
D
E
F
G
H
I
A
Rear LED light
B Battery and controller
C
Beam + connectors: brakes / control screen
D Control screen
E Braking detector
F Front LED light
G Motor wiring harness
H Motor
I Pedalling detector
General operation of the electrical assi󰄋ance
The electrically-assi󰘵ed bike can be used with or without assi󰘵ance by pressing the ON/OFF button.
Always lock the battery with the key when in use. The electrical assi󰘵ance will only operate if you pe-
dal. The assi󰘵ance will switch o󰘯 the moment either of the two brake levers is depressed or the speed
reaches more than 25 km/h. It will then re󰘵art automatically when below 23 km/h. In order to preserve
battery life, the bike is equipped with a «power» limiter that limits assi󰘵ance when the motor is under
heavy 󰘵rain. During intensive use and in exceptional weather conditions, the assi󰘵ance may switch
o󰘯 to safeguard the entire sy󰘵em.