Product Features
• 5-20LPM Adjustable Constant Flow Range
• 5 hours continuous operation at 15LPM with Buck BioAire™ or
Air-O-Cell™ bioaerosol sampling cassettes
• Small and lightweight
• Battery powered, rechargeable with standard charger or optional
FastOne™ One Hour charger.
• Tripod Mount on bottom of unit
• Convenient timers for 1, 2, 5, or 10 minute samples
• End-of-Sample audible and visual indicators
• Easy keypad calibration with supplied Calibration Rotameter
and sampling media in-line for greatest accuracy
Product Description
The Buck BioAire™ Model B520 is a bioaerosol sampling pump
designed to draw air into standard bioaerosol sampling cassettes, such
as the Buck BioAire™ Cassette and the Air-O-Cell™*. These
impaction slit air samplers have little restriction to air flow and allow
larger flow rates to be drawn through the cassette with little
backpressure.
A microprocessor controls the BioAire™’s flowrate and provides
preset timing routines for sample collection. The pump is capable of
flow rates from 5 to 20 Liters Per Minute (LPM). The flows are
adjustable from the keypad in (CAL) Calibration Mode. The
calibrated flow rate will be maintained at a constant flow throughout
the collection period.
Four timing routines are selectable from the keypad and continuous
flow is achieved by pressing the ON key for 4 seconds. The OFF key
manually stops the pump from sampling.
The pump uses nickel cadmium (NiCad) rechargeable batteries and
will operate up to five hours on a fully charged pack.
The standard battery charger supplied with the pump charges
the batteries in 6 hours. An optional FastOne™ (APB-601900)
One Hour charger is available. A/C powered operation can be
conducted with the supplied Standard Charger .
Page 4
Service Information
You must obtain an RMA number prior to returning any
product. Obtain your RMA number by calling A.P. Buck, Inc.
Customer Service at 1-800-330-BUCK or 407-851-8602. To
expedite service and repairs, have your Customer ID handy and visit
our website, www.apbuck.com
, and request an RMA# online.
Please ensure that all products returned to A.P. Buck, Inc.
contain no hazardous materials. Any obviously contaminated
product received will be returned to the customer. All products
scheduled for service must be received within 30 days of the RMA
number issuance date. Unauthorized products will be returned to
the customer.
For all work not covered under warranty, A.P. Buck, Inc. will
repair any instrument for the cost of parts and labor as quoted. If
major components must be replaced, A.P. Buck, Inc. will notify the
customer before proceeding with repairs.
When returning any instrument for service, please include a
Purchase Order marked: “Repair–Cost Not To exceed $250.00
Without Customer Authorization”. Please provide the following
information with your instrument:
Company Name:
Address:
Telephone:
Fax:
Contact Name:
Serial Number(s):
Date of Purchase:
Service Required or Description of Problem:
TECHNICAL SUPPORT SERVICES
Technical Assistance: Phone (407) 851-8602
Fax: (407) 851-8910
Email: apbuck @apbuck.com
Web site: www.apbuck.com
Hours: Monday-Friday 8:00AM to 4:30 PM (EST)
Page 9
To Next Page
Loading...
