To Next PageTo Next Page
Need help?Do you have a question about the Buell XB Series and is the answer not in the manual?
General| Fuel System | Electronic Fuel Injection (EFI) |
|---|---|
| Transmission | 5-speed |
| Frame | Aluminum frame |
| Front Brake | Single disc, 6-piston caliper |
| Rear Brake | Single disc, 1-piston caliper |
| Wheelbase | 52 in (1321 mm) |
| Seat Height | 30.5 in (775 mm) |
Essential rules for safe operation of Buell XB models.
Guidelines for safe and legal riding on public roads.
Location and structure of the Vehicle Identification Number.
Detailed technical specifications for 2008 Ulysses models.
Tire air pressures for Ulysses XB12X under different load conditions.
Discusses suitable gasoline blends and recommended octane ratings.
Overview of controls, indicators, and key switches.
Operation of the ignition and headlamp key switch.
Function and operation of the engine OFF/RUN switch.
How to operate the throttle and clutch controls.
Operation of headlamp and turn signal switches.
Operation of the heated grips switch.
Illustration and explanation of dash panel components.
Explanation of speedometer, odometer, and trip odometer.
Tachometer function, fuel injection system, and check engine lamp.
How to use the gear shift lever and its shifting pattern.
Explanation of the brake system and lever adjustments.
Procedures and warnings for using the fuel filler cap and refueling.
Information on steering head lock and sidestand operation.
Advice on using and adjusting rear view mirrors.
General recommendations for safe operation of Ulysses models.
Guidelines for the motorcycle's initial break-in period.
Pre-ride inspection checklist for safe operation.
Procedures for starting and stopping the motorcycle's engine.
Guidance on upshifting for acceleration and downshifting for deceleration.
Information on windshield, seat, and Triple Tail™ installation and operation.
Information on auxiliary power outlets and helmet lock usage.
Suspension definitions, adjustments, tuning, preload, and damping.
How to adjust the rear shock and front fork preload.
How to adjust front fork and rear shock damping.
General maintenance operations for safe motorcycle operation.
Initial service requirements and regular maintenance intervals.
Procedures for checking oil level and changing engine oil.
Transmission lubrication, primary chain inspection, and adjustment.
Procedures for front fork oil and air filter.
Clutch cable adjustment and brake system service.
Tire inspection, care, and replacement guidelines.
Checks for shock absorbers, spark plugs, and ignition timing.
Information on valve tappets, wheel bearings, and voltage regulator.
Idle speed control and interactive exhaust system.
Battery care, charging, voltmeter tests, and jump-starting.
Headlamp information and location/function of fuses and relays.
Guidelines for placing the motorcycle in storage.
Procedures for cleaning Buell components and surfaces.
Care instructions for windshields and molded-in-color body panels.
Procedures for minor scratch removal and cloth/vinyl care.
How to clean and polish motorcycle wheels.
Care for the aluminum frame and swingarm.
A guide to diagnose motorcycle problems.
Troubleshooting common engine and lubrication problems.
Troubleshooting common electrical and transmission problems.
Troubleshooting common clutch and brake problems.
Information on the motorcycle warranty and maintenance records.
Recommendations for maintaining the Buell motorcycle.
Information on emission and noise control system warranties.
Details of the 2008 Buell motorcycle limited warranty.
Information on California emission and EPA noise regulations.
How to obtain service and dealer information.
Reporting vehicle defects to NHTSA and owner transfer process.
Documentation required for imported Buell motorcycles' warranty.
Schedule of regular maintenance intervals for Buell models.
List of available service literature and parts catalogs.
List of trademarks associated with Buell and H-D Michigan, Inc.
