WHAT’S INCLUDED:
(1) HUB Wireless Remote
(1) USB-A to USB-C Charging Cable
(1) Rechargeable Internal Lithium-ion Battery
2-Year Factory Warranty
info@paulcbuff.com | 1.800.443.5542
CHARGING THE HUB
To charge the HUB plug the USB-C side of the included charging
cable directly into the HUB. Then plug the USB-A side into a wall
outlet connector.
Slide the bottom of the HUB onto your camera’s hot shoe.
Turn the locking wheel clockwise to lock the HUB on to your camera.
ATTACHING THE HUB TO YOUR CAMERA
The HUB remote will function as a standard trigger, similar to our CyberSync Trigger
Transmitter, and provides all of the necessary communication between any camera
brand and a Paul C. Buff, Inc. flash unit. To utilize the TTL and HSS capabilities
of a Paul C. Buff, Inc. flash unit that is equipped with those features (i.e. the LINK),
a camera specific version of the HUB will be required.
To Next Page
Loading...