To Next PageTo Next Page
Need help?Do you have a question about the Buffalo Tools GEN3250 and is the answer not in the manual?
General| Brand | Buffalo Tools |
|---|---|
| Model | GEN3250 |
| Category | Portable Generator |
| Language | English |
Emphasizes reading all instructions and contacting customer service for issues.
Explains DANGER, WARNING, and CAUTION symbols for hazard identification.
Covers EPA emission warranty and the 90-day limited warranty terms.
Generator exhaust contains deadly CO gas; use only outdoors in well-ventilated areas.
Highlights dangers of gasoline flammability and explosion; safe refueling practices.
Alerts to potential cancer/reproductive harm from exhaust chemicals per California law.
Stresses grounding, avoiding wet conditions, and not touching bare wires.
Advises caution around hot surfaces and wearing hearing protection.
Notes generator's limitations with sensitive electronics and extension cord usage.
Details items included with the generator, like DC wires and a spark plug wrench.
Visual guide to the generator's main components and controls.
Procedure for filling the engine crankcase with the correct oil type and amount.
Instructions for safely filling the fuel tank with fresh, unleaded gasoline.
Essential steps for properly grounding the unit to prevent electrocution.
Procedure to check the engine oil level before each operation.
Guidance on checking the fuel tank and adding gasoline as needed.
Ensures proper grounding and no connected loads before attempting to start.
Step-by-step instructions for starting the engine using the recoil starter.
Explains rated (running) and surge wattage for connecting devices.
How to select and connect devices based on wattage to avoid overloading.
Details correct outlet use and the 2500W limit for the 120V outlet.
Order for turning on connected devices, starting with the highest wattage requirement.
Warning against connecting 50Hz or 3-phase loads to the generator.
Chart providing recommendations for extension cord length and gauge based on power.
Guidance for using the 12V DC outlet for compatible devices up to 8.3 Amps.
Step-by-step process for safely turning off the generator.
Table detailing required maintenance tasks and their frequency for optimal performance.
Instructions for inspecting the engine oil level before each use.
Procedure for changing oil, including drain and fill instructions.
Guidance on cleaning the air filter to ensure proper engine airflow.
Instructions for inspecting, cleaning, and gapping the spark plug.
Procedure to drain fuel from the tank and carburetor for long-term storage.
Guidelines for safely storing and transporting the generator, especially for extended periods.
Common causes and solutions for the generator failing to start.
Solutions for when the generator runs but produces no power or low voltage.
Addresses problems like the engine not staying running or not supporting connected loads.
Detailed visual representation of generator parts and their placement.
List of generator parts with associated part numbers and quantities.
Visual breakdown of the engine's internal and external parts.
List of engine parts, their numbers, and quantities for ordering.
Continuation of the engine parts list with part numbers and quantities.
