3
UK
Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
•Dry thoroughly after cleaning.
Descaling
In hard water areas lime scale can build up within the appliance after prolonged use. To descale the
appliance:
1. Pour a solution of descaler and water into the appliance.
2. Brush the interior gently with a soft bristled brush.
3. Discard the solution collected in the jug.
4. Fill the appliance with clean water and turn back On to flush out the system.
Flush out the system thoroughly to remove any descaler residue.
5. The appliance is now ready for use.
Tro ublesh ooting
Note: Use a suitable descaler and always follow the instructions on the container.
BUFFALO recommend that this appliance is descaled every 3 months or more frequently
in hard water areas.
Fault Probable Cause Action
The unit is not
working
The unit is not switched on Check the unit is plugged in correctly and
switched on
Plug and lead are damaged Call BUFFALO agent or qualified technician
Fuse in the plug has blown Replace the plug fuse
Power supply Check power supply
Internal wiring fault Call BUFFALO agent or qualified technician
Power light
comes on but
water does not
reach
temperature
Thermostat fault Call BUFFALO agent or qualified technician
The tap is
leaking
The tap has become loose Tighten the tap handle
To Next Page
Loading...
