English - 29
07 TECHNICAL SPECIFICATIONS
Error Items Code Error Beep Cause
HVT-I Power
Error
E41 One long beep
for 2 sec.
The circuitry inside the oven is not
working correctly.
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E41”
appears again. If the symptom persists, contact the nearest
service centre.
HVT-II Power
Error
E42 One long beep
for 2 sec.
The circuitry inside the oven is not
working correctly.
Remedy
Unplug the power cord and wait for 10 seconds.
Plug the power cord in again and check if the error code “E42”
appears again. If the symptom persists, contact the nearest
service centre.
EEPROM Error
E5 One long beep
for 2 sec.
Memory IC (EEPROM IC) is not
working correctly.
In this case, other features except for
memory function work properly.
(You can operate the oven manually.)
Remedy
Press CANCEL button one or more times and try to start a
memory heating. If the error code “E5” persists, contact your
nearest service centre.
For any codes not listed above, or if the suggested solution does not solve the
problem, contact your local Bualo Customer Care Centre.
technical specifications
Bualo strives to improve its products at all times. Both the design specifications and
these user instructions are thus subject to change without notice.
By righ
t of the common regulation 2/1984 (III.10) BKM-IpM. we as distributors testify,
that the GK640, GK641 ovens of Bualo comply with the undermentioned technological
parameters.
Model GK640 GK641
Power source
230 V ~ 50 Hz
Power consumption
Microwave 3200 W 3000 W
Output power 1850 W (IEC-705) 1500 W (IEC-705)
Operating frequency 2450 MHz
Dimensions (W x H x D)
Outside
Oven cavity
464 x 368 x 557 mm
370 x 190 x 370 mm
Volume 26 liter
Weight
Net 32 kg approx
Noise level 54.5 dB
514
1000
368
444
10
464
486
530
43
26
557
GK640-E_GK641-E_XEU_DE68-04279B-01_EN.indd 29 2014-06-27 6:49:56
To Next Page
Loading...
