Buffalo GM949 - Page 22

To Next Page

To Previous Page

Prompt message on display Probable Cause Solution

Close the

Brewing Door

Brewing door open Close the brewing door

Insert the Coffee Grounds Waste Tray

Insert the

Coffee Grounds

Waste Tray

After cleaning, the

coffee grounds tank is

not put back into the

machine

Put the coffee grounds tank back

to the machine

Please empty the Coffee Grounds Waste Tray

Please empty

the Coffee

Grounds Waste

Tray

Coffee grounds tank is

full

Clean out the coffee grounds tank

and return it to the machine

NTC error NTC failure Turn off the machine, wait 30

minutes, and turn it on again.

If problem persists, consult a

qualified technician

Drive System

error

Transmission system

abnormal

1. Open the brewing door, take

out the brewing unit core, and

check for the presence of any

foreign object thus causing the

brewing core to stick

2. Turn off the main power

supply, wait a few minutes

then restart the machine

GM949_EN_A5_v1_20240528.indb 22GM949_EN_A5_v1_20240528.indb 22 2024/5/28 11:272024/5/28 11:27