THIS PROCESS WILL RE-FORMAT DRIVES IN NAS
If you want to update firmware using LSUPDATER.EXE and have data on
working drives in NAS, go to EDITING AND RUNNING LSUPDATER PROGRAM
– WORKING DRIVES WITH DATA
EDITING AND RUNNING LSUPDATER PROGRAM
– NO DATA ON DRIVES
This program will force update the NAS with the firmware packed in the zip file,
initialize the NAS and drive(s), and force format drives.
Open LSUPDATER.INI file for editing.
Edit the [Flags] and [SpecialFlags] sections as follows with one space before and
after the equal sign (=):
[Flags]
VersionCheck = 0
[SpecialFlags]
NoFormatting = 0
Debug = 1
Save LSUPDATER.INI file
Do not change any items above [Flags] header
This edit will do the following:
- VersionCheck = 0 Will Not Check Version (0=false)
- NoFormatting = 0 Will Format NAS Drives (0=false)
- Debug = 1 Debug Enabled (1=true)
To Next Page
Loading...
