1) It is strongly suggested to turn off all other Link/Tera-Stations on network
2) On computer, Run LSUPDATER.EXE
3) Choose Link/Tera-Station to update
4) Right click on Title Bar. Edit following options:
Update Config
[x] Update boot [x] Do not check version
[x] Update kernel [x] Rebuild partition table
[x] Update initrd [x] Delete user data partition
[x] Update root [x] Force update
Destination of Firmware
\boot
Change IP Address if required
CONFIRM PROPER OPTION SETTINGS BEFORE PROCEEDING
- All option boxes CHECKED
5) Click “OK”
CONFIRM PROPER NETWORK NAS TO UPDATE BEFORE PROCEEDING
7) Click “Update”
LSUPDATER will inform you when update process is complete.
When update is finished, you can now go to Navigator to program the NAS
options and applications.
To Next Page
Loading...
